and most eco-friendly honeycomb panels at
what I believe to be is the best cost in the world"
Peter Sing, Inventor & Owner
PROUD TO SAY: OUR PRODUCTS ARE MADE IN THE U.S.A.
Sing Honeycomb Products and their impact on the Environment
Our Sing patented honeycomb panels reduces the weight and replaces the high energy consuming materials such as wood, plastic, metal, fiberglass, and concrete with minimum impact to the earth.
The following is the energy consumption comparison of sing honeycomb vs. wood, and wood vs. the other man made materials for your reference.
The energy consumption of wood products vs. others:
The energy required to produce one ton of wood is much less than that for other materials.
Compared to the energy required to produce a ton of wood, it takes:
·
5 times more energy to produce 1 ton of cement
14 times more energy to produce 1 ton of glass
24 times more energy to produce 1 ton of steel
126 times more energy to produce 1 ton of aluminum
Sing honeycomb vs. wood, Sing honeycomb only has 10% or less of wood and almost 90% of air. It is the strongest lightweight, renewable material made of vertical grain natural wood veneer fiber. Products made of Sing honeycomb core are the strongest lightweight renewable products available at a comparable low cost.
So deciding if a product is “Green” it should be based on the Life Cycle Assessment and energy consumption required to produce, transport, and dispose of consumer goods products and this is why Sing Honeycomb is truly a “Green” product.
What is a Torsion Box?
A torsion box consists of two skins applied to a core material, usually a grid or framework of some kind. The torsion box functions as a beam, but is considerably lighter than a solid beam of the same size without losing much strength. Torsion boxes are used in the construction of airframes, especially wings and vertical stabilizers, in making wooden tables and doors, and for skis and snowboards. and other products that you want to be light and strong.
From Left to Right: Our Torsion Box starts with our honeycomb core (pic 1), then laminated with the outer skins, our panel is strong but light and can hold 4 people with no bending (pic 2), finished product is a platform made into a trailer (pic 3) and is strong enough to hold a truck.
What is a vacuum table?
In almost all cases, when you are cutting with automated cutting systems, the item is held down using vacuum. Technically the correct thing to say is that the item is held down by lowering the pressure in a plenum in the cutting table and the pressure differential between this and the atmosphere applies a strong and even force to the material on the table. In fact, the pressure differential only needs to be small to give a very high hold-down force.
Do I need a vacuum table?The short answer is that you are very well advised to have a good vacuum table when cutting!
The Good News is that Sing Honeycomb Products can provide any size Vacuum Table/Torsion Box for your manufacturing needs
For more information about this products or
any of our other products contact us at:
360-495-3577 or info@singhome.com
________________________________________________________
Our patented Sing Honeycomb Panels are used for a many number of projects from doors to walls, to laminate flooring panels to furniture and of course Torsion Box manufacturing.
Each of our panels are custom made to each customer's order. Using our panels is just like using your basic plywood sheet or wall board only lighter and stronger.
Standard Panel:
4’ x 8’ (finished size = 47” x 95”) with or without solid wood edging and your choice of skins front/back: $8.00/sq ft
Single Oversize Panel:
1 side of panel over the standard size - with or without solid wood edging and your choice of skins front/back: $16.00/sq ft
Double Oversize Panel:
Both sizes are over the standard size—with or without solid wood edging and your choice of skins front/back: $24.00/sq ft
Commercial or Wholesale Customers contact us at
360-495-3577 or info@singhome.com
for a personalized quote
return to top of page
_______________________________________________________
set of residential doors) for guard shack) restaurant Carriage Door) Wall for Art Gallery)
refrigerator)
Our patented Sing Honeycomb Panels are the core of your next door, whether commercial or residential, interior, exterior, standard hinge or the space-saving pocket door, sliding closet doors, garage doors, moveable walls, room dividing walls or partitions, our panels will provide a strong, stable, flat surface to create your special project or commercial job.
Each of our door/wall panels are custom made to your exact specifications, all you have to do is add your special touches and hardware and you have a door to last you a lifetime. A door that is not only going to stay flat and close smoothly but is lightweight so less strain to your hardware which means your hardware will last longer. In addition using our honeycomb core for your door, partition or moveable wall project will afford you a measure of insulation as well as noise reduction properties.
For purchases of 5 or more panels, and for our
Commercial or Wholesale Customers contact us at
360-495-3577 or info@singhome.com
for a personalized quote
return to top of page
________________________________________________________________________
Sing Honeycomb Furniture
Never replace your furniture again!
Made in the USA. No particle board! Structure is made with clean all natural wood fiber. Our furniture is super light, super strong and made with 1 1/2" thick patented Sing Honeycomb panels.
We offer a lifetime structural guarantee. Our furniture is made with Northwest Cedar with a natural eucalyptus inlay and never built with press-wood or MDF in any of our products.
Furniture can be shipped fully assembled un-assembled for easier transport
or to order please contact us at:
360-495-3577 or info@singhome.com
additional pictures and information about our Sing
Honeycomb furniture can be viewed by clicking here
________________________________________________________
plastic skin signboard) Signboard)
Proud to say: Made in the USA. No particle board! Our signboards are super-light,
super-strong and made with our patented Sing Honeycomb panels. Our signboards can come in almost any size and thickness, with your choice of outer skins for all of your advertising needs. Make your sign as simple or as elaborate as you wish, our sandwich signboard panels are up to any task.
or to order please contact us at:
360-495-3577 or info@singhome.com
_______________________________________________________________
dishwasher safe) Board with juice groove)
Sing Honeycomb Butcher Block
Cutting Boards
We believe we have the best
cutting boards ever invented!
This Butcher Block Cutting Board is available from our patented Sing honeycomb substrate with your choice of butcher block material which gives our cutting board it's beautiful look and a strong and stable cutting surface.
-
Available in choice of our Cherry & Maple or Cherry with Port Orford Edge Banding
-
Our patented Sing Honeycomb Cutting Boards will not warp or crack. It stays true and flat with the counter top to avoid vibration and reduces the cutting noise that is created by other boards due to shaking and vibrations.
-
Sing Honeycomb Cutting Boards are lightweight which makes moving, washing and carrying easier.
-
Dishwasher safe, easy to clean
-
Earth friendly, patented Sing honeycomb uses less wood to make than solid wood cutting boards.
-
Less chance of ends of cutting board cracking or warping
-
Resurface service, Sing Honeycomb Cutting Boards will provide a resurfacing service after years of uses for less than half of the original purchase price
-
Free Shipping when purchasing 4 or more cutting boards at one time
or to order please contact us at:
360-495-3577 or info@singhome.com
